Ana içeriğe geç

The wi-fi only version of Apple's iPad Air, model number A1474. Available in Space Gray or Silver, it packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

299 Soru Tümünü görüntüle

What digitiser should I choose?

Hello,

I am looking for a new digitizer for my iPad Aid 1st gen WiFi.

I’m wondering if a cheap one on eBay would be enough and lag-free or should I invest in an iFixit version?

With the eBay alternative, I think that it could misbehave and get buggy. Does anybody have any experience?

Thank you very much.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Don’t buy from Ebay, too many cheap knock-offs.

Choose reputable vendors like iFixit or MobileSentrix.

Bu yanıt yardımcı oldu mu?

Puan 4

5 Yorum:

Thank you for your answer. I didn’t know about MobileSentrix. I will buy the digitizer from them because it is honestly too expensive on iFixit.

Let’s hope it’ll work flawlessly.

tarafından

I second this as well. It's entirely possible to get a defective Digitizer/Glass replacement from either iFixit or MobileSentrix, but the return/replacement process is much easier from my experience. Make sure to test the screen functionality before you seal it down as they likely won't take it if it's damaged during removal if the screen is defective!

tarafından

@martinldn I never had a problem with MobileSentrix, they carry some of the best iPad digitizers on the market at reasonable prices. Make sure you test touch functionality like Tyler said, here's a great re-assembly guide written by Minho @refectio in his answer to this post: After doing my repairs (battery and screen) I have problems

tarafından

I was about to order from MobileSentrix but realised that i can’t order from where I am.

I did not mention that I live in France.

Is there another international and cheaper alternative to iFixit?

tarafından

@martinldn I don't know any vendors in France that are equivalent to MobileSentrix in terms of quality, here are some tips to pick a high quality digitizer:

- Ask if digitizer has pre-installed Tesa 61395 adhesive, this is one of the best aftermarket adhesive.

- Ask for pictures of actual digitizer sold and check if it has bronze coloured frame, companies often post random pictures on product listing to fool consumers.

tarafından

Yorum Ekle

Yanıtını ekle

Martin Ladan sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 84