Stuck at apple logo
After lcd fpc replacement phone booted fine. Now stuck on apple logo and power supply showing 0.33 amps when button is pressed. Changed tristar and still the same. Any ideas
Bu iyi bir soru mu?
Puan
1
607452
1 Cevap
İtibar: 468
7
1
1
Have you tried a new battery?
Bu yanıt yardımcı oldu mu?
Puan
0
Doing the same through dcps so doubt it's a battery issue
Is it showing 0.33A on ammeter or DCPS?
Chris Stables tarafından
@imicrosoldering it was but I replaced tigris now when it turns on current goes up and down like booting then spikes to 0.9 the drops and hangs on 0.2 . Replaced tristar 3 times and tigris twice. Dcps
daniel tarafından
Sometimes a Tristar replacement on the IPhone 6s requires an update.
Chris Stables tarafından