Eşyalarını Tamir Et Topluluk Mağaza

4-inch iPhone released in March 2016 with similar hardware specifications to the 6S. Available in Silver, Space Grey, Gold, or Rose Gold with 16/32/64/128 GB storage options. Model: A1662 and A1723

1049 Soru Tümünü görüntüle

Seçenekler

I can’t get the home button bracket screws out!

Hi,

I have repaired 2 iPhone SEs so far, and every single one I have found the two screws over the home button bracket very hard to get out. I have ripped the bracket out successfully twice, but because of the shattered screen on this one, I cannot get it out at all! The screws are also now stripped!

Any ideas?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

On water damaged SE’s I have drilled the left screw out than covered the home button components and applied super glue to the screw on the right.

I than bend the bracket up from the left and turn the bracket hopping the right screw will come loose. If this doesn’t work I drill it out.

They are easy to drill out if you have the right tools. I use a Dremel with dentist bits. If I were you I would invest in some quality drivers for removing the screws.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

I’m definitely going to hive drilling a go, however where can I get the correct type? I searched for one, but had no matches. Thank you.

tarafından

I think I purchased mine from iPad Rehab but that was years ago.

tarafından

Yorum Ekle

Yanıtını ekle

TheRe sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 102