Eşyalarını Tamir Et Topluluk Mağaza

Wi-Fi only version of Apple's 2nd generation iPad Air. Model A1566.

214 Soru Tümünü görüntüle

Seçenekler

Touch ID doesn't work after screen replacement

Hello, I have a question. Recently I broke screen in my iPad air 2 and today I decided to replace it, I bought 3-rd party screen replacement (from china) and after replacement everything works fine except touch ID, I’m sure that I didnt rip any cable, touch ID is original paired with this board.

Is this my fault or apple blocked posibility to replace screen with 3rd party one ?

Thanks for any help

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

3rd party screens are fine. In fact I think there are only original screens available on this model.

There will either be :

  • Original replacement screen (Brand new, not refurbished)
  • Refurbished screen (Original display, but the glass is a replacement aftermarket one)

Either the connector for the home button on the screen is no good or the home button ribbon cable flex is damaged in some sort of way most likely only visible under microscope.

If the old screen is good enough to display and use touch see if touchID works on the old one. Remember to disconnect battery first with a thin plastic card or pry tool as shown in the iFixit guide to avoid blowing the backlight circuit on these when handling the display connectors.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

1 Yorum:

home button isn’t broken it works fine with old screen bt as soon as I put it in this chinese screen I can’t set up finger print. I’ve checked all ribon cables and there is no damage

tarafından

Yorum Ekle

Yanıtını ekle

sofles sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 5

Her zaman: 90