Display screen with "Red static colored"

Question

MacBook Pro 13" Unibody Mid 2012

Mid 2012 model, A1278 / 2.5 GHz i5 or 2.9 GHz i7 processor.

1624 Soru Tümünü görüntüle

Frankhil Contreras @frankhilco50511

İtibar: 13

1

Gönderildi: 17 Oca 2020

Seçenekler

Display screen with "Red static colored"

I started to see “red static” on the borders and anywhere there's black on the screen. Doesn't show up on the Mac OS X boot screen. Pretty sure it's a hardware issue and not software since it goes away when I close the lid about 3/4 of the way down, but the problem is getting worse every day. I suspect that is the ribbon cable that connects my display to the logic board , any suggestion about how to replace it are welcome!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 1

Yorum Ekle

2 Cevap

Seçilen Çözüm

mayer @mayer

İtibar: 685,3b

MacHale Enterprises

3,4b

1,1b

2,6b

Gönderildi: 17 Oca 2020

Seçenekler

Try starting up in Safe Mode by holding down the Shift key on start up. This will confirm if you have a hardware or software issue if the symptom disappears.

If it’s gone, install a good “Paid For” antivirus like Symantec and run it.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 3

2 Yorum:

Hello,

Thanks for your reply. I test it on Safe Mode and the problem continue. So is Hardware :(

Regards!

Frankhil Contreras tarafından 17 Oca 2020

Ok, now lets see if we can narrow it down. Hook up an external display and see it it appears on the external. If so, you have a GPU issue, if not then we go to the display.

mayer tarafından 17 Oca 2020

Yorum Ekle

Hello,

Thanks for your reply. I test it on Safe Mode and the problem continue. So is Hardware :(

Regards! — Frankhil Contreras
Ok, now lets see if we can narrow it down. Hook up an external display and see it it appears on the external. If so, you have a GPU issue, if not then we go to the display. — mayer