Ana içeriğe geç

Repair and disassembly guides for Epson printer. The company was founded in 1942 as Daiwa Kogyo, Ltd., but merged with another company in 1959 to create Suwa Seikosha Co., Ltd.

619 Soru Tümünü görüntüle

My WF-3640 close cover sensor

When I turn the power on to my WF-3640 it starts beeping and flashing with message close cover then back to standby over and over never ending. I can shake it and it will work for a while then starts over. How do I access the sensor and clean it?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

@fredric2 sounds like issues with the “Cover Open Sensor”. Should be on the front lip of the top cover and may require a partial disassembly. This may come in handy. You are looking for something like this (different model of the WF shown)

Block Image

Bu yanıt yardımcı oldu mu?

Puan 3

1 Yorum:

Thankyou, oldturkey03. After looking at the picture and link you supplied I was able to locate and clean the sensor. The sensor for the WF-3640 is just left of center on the front edge of the frame. There is a post on the cover that moves the contacter back when closed.

tarafından

Yorum Ekle

Yanıtını ekle

Fredric sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 12

Son 30 gün: 48

Her zaman: 2,294