Ana içeriğe geç

25 Eylül 2015'te yayımlandı. A1688/1633 modeli. Bu cihazın tamiri eski nesillerinkine benzer; tornavida ve kaldırma aletleri gerektirir. GSM ya da CMDA olarak / 16, 32, 64 yada 128 GB kapasiteli / Gümüş, Altın, Uzay Grisi yada Rose Gold (Gül Altın) seçenekleri mevcuttur.

2687 Soru Tümünü görüntüle

After tightening down screen, orange stress marks above home button

When my phone screen isn’t pressed into place and screwed down, it’s fine. But as soon as I press it in and screw it in at the two bottom screws, almost straight away an orange stress mark appears at the bottom, in the same place every time. I’ve tried removing every single piece of adhesive on the screen. Could it be because I’m not using my screen adhesive to put the screen back in place, and I’m only just pressing it in without the glue?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi @charliewhile

How does your battery look? iPhone batteries can fail in a way that causes them to swell, sometimes only on the bottom part. As a general rule, if you see these “orange” stress marks on the LCD, there is something pushing the screen back off the frame from the inside. Check the frame directly below the stress marks for anything that might be in the way and remove it.

Bu yanıt yardımcı oldu mu?

Puan 1

2 Yorum:

I figured it out, I had just changed the battery and the adhesive tabs were sticking up just a little bit, that fixed it

tarafından

Nice! Glad it was an easy fix

tarafından

Yorum Ekle

Yanıtını ekle

Charlie While sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 11

Her zaman: 349