Ana içeriğe geç

Model A1419 / EMC 2806 / Late 2014 or Mid 2015. 3.3 or 3.5 GHz Core i5 or 4.0 GHz Core i7 (ID iMac15,1); EMC 2834 late 2015 / 3.3 or 3.5 GHz Core i5 or 4.0 GHz Core i7 (iMac17,1) All with Retina 5K displays

566 Soru Tümünü görüntüle

Alternative RAM modules compatibilty

Hello all

I have a question about an Apple iMac 27” “Core i7” 4.0 (5K, Late 2015).

https://everymac.com/systems/apple/imac/...

It currently has 2 x 8GB sticks of (204 pin) 1867Mhz DDR3 RAM installed.

The Everymac website doesn’t state what other RAM will work in this machine.

Can anyone confirm if DDR3 (204 pin) 1600Mhz clock speed will work in this machine?

I presume if it does i.e mix and match the 1600Mhz and the 1867Mhz together the logic board will clock the 1867Mhz to match the 1600Mhz?

Any way of finding out the iMacs logic board memory clock speed settings or parameters?

Any confirmation of this would be grateful.

Thanks in advance

Block Image

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Using slower OS-DIMMs while possible will hold your system back. I strongly recommend sticking with what Apple recommends. The cost difference is not enough to fight over. Many people often get the next higher speed SO-DIMM’s if they can’t get the correct SO-DIMM’s.

Mixing different speed OS-DIMMs can make a system unstable. While the bus clock will be at the slower speed, there is other aspects of the RAM that are not visible which can cause issues. Here’s a deeper look Memory (RAM) Timings & Latency: CAS, RAS, tCL, tRCD, tRP, tRAS

Check your RAM configuration by opening: About This Mac > System Report > Memory Your RAM should be running all at the same speed bus speed.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Bz8B1 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 5

Her zaman: 202