İtibar: 1
1
Hey, I just replaced the hole Front Unit, exept the LCD by a new one(so the touchscreen and the middle-thing with home-button etc)
And now, nothing happens and it won´t turn on anymore, no matter how often I try to put it on.
Checked all the connectors a dozen of times!
Greets, Philipp
Bu iyi bir soru mu?
İtibar: 733
6
2
1
Iphone 3g/s dosent like changing parts while powered on
Reattach the battery and see if that works
Might be too late
Bu yanıt yardımcı oldu mu?
changing the LCD helped :-)
so problem was old LCD was damaged?
I think so, it is the only possible reason :-)
İtibar: 55
3
1
I had the same problem...but successfully live up my iphone.
Here are what I did:
- recheck connectors number 1, 2, 3 (make sure they are not broken or detached from their ribbon cable)
- recheck the connections to main board (perfectly fit)
- connect my iphone to iTunes, resetting the system to factory setting (iTunes will ask and do backup of all your data)
- if your iphone display iTunes symbol or any text other than white/black screen, then everything will be okay.
- after resetting, I restore the system firmware and data back to latest condition. some apps needs to be re-installed from appstore.
Hope you can live up your iphone again...
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 0
Her zaman: 782
With my old Front panel I can start now, but only white screen -_-
Philipp Buehler tarafından
lots of problems with the no3 earpiece flex being not accepted by iphone. try leaving that off and see if it works.
pollytintop tarafından
------>Old Display, old LCD: White Screen, even without #3.But Working(Vibrate and ringing) Turning on only by HOME+ON-Button
------>New Display, old LCD: Nothing
Philipp Buehler tarafından
New Display has now Wwhite screen too.
How to get my picture back.
And how can I power off the Iphone?
Philipp Buehler tarafından