Eşyalarını Tamir Et Topluluk Mağaza

22 Eylül 2017'de satışa sunuldu. Model A1863, A1905 olarak tanımlanıyor. GSM ya da CDMA olarak 64 ya da 256 GB kapasitelerinde, Altın, Gümüş, ve Uzay Grisi renklerinde satılır.

872 Soru Tümünü görüntüle

Seçenekler

Touch is dead when I connect lcd and 3d touch cable

I bought not original iphone  LCD in aliexpress, and install it my iphone 8. It works well, but after remove aliexpress panel and install my original LCD, touch did not work, so i tried disconnect 3D touch cable and connect only LCD cable, touch works well. I think my original panel was broken, so I bought another original LCD and connect all cable, but It was same as my original LCD.

i connect this cable only like this image

Block Image

and connecting this cable, touch did not work.

Block Image

Can I fix it without change motherboard?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

This is a common problem with the iPhone 8 series caused by the ground pins at the end of the home button connector being pushed in. If you have some sort of magnification you should be able to pry them out into their normal position.

Block Image

This is the FPC that your cable in the bottom image connects to

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Seçenekler

That is strange. When you connect the LCD, do you have the original home button installed? iPhone 8’s are more dependent on it than previous generations. Since touch works when the 3D Touch cable is disconnected, maybe check if the cable touches anything on the motherboard that it isn’t supposed to.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

JungMin sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 156