Ana içeriğe geç

2.26 or 2.4 GHz / White plastic unibody enclosure

645 Soru Tümünü görüntüle

white screen, chime, no logo nor spinner, caps lock works

The pimary operation I think I’ve did was to reapplying thermal paste, as I was doing that, I cleaned the trackpad and removed a CD that was stuck in the optical drive (it was not reading anyway). So, I’ve pretty much disassembled the whole thing.

Now, when I power on the device the following happens:

  1. I hear the chime
  2. LCD powers up, completely white with backlight on.
  3. No apple logo or anyhting.
  4. After a while screen gets a tiny bit dimmer, almost like power saving feature but the it does this even when the power is plugged.

Caps lock works.

I’ve tried reseating LCD cable to the logic board several times.

I’ve also read chime, white screen, no logo or spinner

  • Safe boot didn’t work.
  • Unplugged hard drive and optical drive, plugged in a Mojave install usb stick and it still didn’t work.
  • I don’t have a minidisplay port adapter so I can’t test an external monitor just yet.
  • Seconds after power up I can feel heatsink is getting quite hot, touchable hot but barely touchable. Is that normal for a Core 2 Duo?

Any ideas what might have gone wrong?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

I have an A1342 with similar problems to yours. I’m suspecting it’s the same issue as mine - a fault with the logic board.

I tried using an external display on that, absolutely nothing. The computer also gets hot but after about 5 minutes.

I should also mention Mojave is officially unsupported on this MacBook generation. Maximum they can support is High Sierra 10.13. You can get it running with a patcher but I don’t advise doing that.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Engin Aydogan sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 36