Eşyalarını Tamir Et Topluluk Mağaza

The Kenwood Chef A701A is a stand food mixer released by Kenwood.

47 Soru Tümünü görüntüle

Seçenekler

Appliance will not power on

I decided to take the mixer (Kenwood A701A) apart to clean it up properly. The entire machine was taken apart however, all the electronics and the engine was merely removed from the housing and not interfered with The same with the gearbox. Once everything had been cleaned, ( the gearbox and engine was left as it was) the mixer was assembled without any difficulties.

Once plugged in and switched on, no response from the engine. It was just completely dead.

What do I need to look for?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Hi @prishen ,

Here’s the circuit diagram for the mixer taken from the service manual

The motor operate circuit seems fairly straightforward. Power connects through the switch to operate the motor, so most probably a wire came loose or a connection was broken when you removed the electronics.

Testing with the power disconnected using an Ohmmeter should help to track down where the problem is.

Block Image

(click on image to enlarge for better viewing)

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Prishen Naidoo sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 20

Her zaman: 1,860