Ana içeriğe geç

Apple's fourth-generation smartwatch, with optional cellular connectivity, released September 21, 2018.

122 Soru Tümünü görüntüle

Replaced screen but still is not turning on

I was working on a cracked apple watch and sadly damaged the LCD while attempting a repair, and had to replace the screen of the device. I replaced the screen with one from an iCloud locked device, but the screen would not turn on. I thought the issue might be the screen itself, so I decided to buy another screen and try that out. That one did not work too. The watch still vibrates when it turns on but the screen stay off. The watch does not make any sounds when trying to play a sound through the find my app.

To add, I tried to replace the battery to no avail and I also tested both screens with another watch and they both worked. The LCD wiring does not look damaged.

Does anyone know what’s going on with this watch and how to fix it?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

4 Cevap

Filtre ölçütü:
Seçilen Çözüm

Test the battery connector to make sure the correct voltages are running. If they are not, micro solder a new connector from a donor board.

If running the correct voltages, replace LCD cables.

The screen will not turn on or boot loop if something is stuck in the connector on the screen, corrosion, short, or if the pins are bent out of place.

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

Hello, do you mean the battery connector that is located on the mother board? Can I use the connector from different Apple Watch?

tarafından

Yorum Ekle

I found that the LCD cables were damaged. Once they are replaced I will update this

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

Very curious to know if this is possible. It's my understanding that these cables are not repairable. At least probably not easily. I'm guessing they are micro-soldered.

tarafından

Yes, t is, however difficult. Pads can be easily pulled while removing the connector

tarafından

Yorum Ekle

I’m trying to replace the paper tin cables like glue that are behind the lcd cables and I don’t know how you call them or even if I can buy the is for a series 4 Nike edition cellular and gps I rink they ere called ribbons but I’m not sure

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

They are microsoldered on. Parts are on mobilesentrix

tarafından

Yorum Ekle

If anyone can help me I’ll appreciate

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Rami Abdi sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 6

Son 30 gün: 18

Her zaman: 1,327