Ana içeriğe geç

Guides for the Wi-Fi version of the iPad Mini 2. Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

220 Soru Tümünü görüntüle

Black Screen Post Repair

I replaced a digitizer on an iPad mini 2, the tablet was partially functional prior to the repair (the screen was cracked and the top half of the digitizer was dead. I was unable to turn it off prior to the repair). After tearing it down and replacing the digitizer, the tablet doesn’t turn on. I’ve tried a new LCD and a second digitizer. When I attached it to my Macbook, the computer recognized it and said it was in restore mode and would need to be resotred to work, however I still do not have any image on the screen. I’ve checked with a flashlight to make sure it wasnt the backlight to the best of my ability. I’ve attempted a soft reset. The only think I have not attempted was a battery replacement as I do not currently have access to a battery replacement for this particular device. Any advice would be helpful!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

If you have already tried a new LCD then it would have to be the connection on the logic board. I don’t like swapping stuff until the problem is fixed, so I hate to tell you to keep replacing components, but you could try a new logic board.

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

Unfortunately I do not have access to a new logic board.

tarafından

Yorum Ekle

Yanıtını ekle

Gabrielle Hayes sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 66