Ana içeriğe geç

Repair information and troubleshooting for Craftsman-brand riding lawnmowers.

553 Soru Tümünü görüntüle

Engine turns and cranks but just does that and never fires up.

Ok guys I’m at my wits end. I’m learning as I go here. I have a older 2005 Craftman DLT 3000. Put new battery in, New Spark plug, fresh gas and changed the oil. It just revs up and never fires over. What advice would you give for my next step or steps ?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:

Have you checked the compression. It needs at 80psi of compression but it should be more like 110psi. Did you verify you have spark? You can but a spark tester at the auto parts store for a few dollars. Did you make sure that fuel is getting into the carburetor and then into the engine? It needs compression, spark and fuel to run. First verify that you have all three. After you verify that you have compression and spark try spraying starting fluid into the carburetor. If it starts you either have a bad fuel pump or the carburetor needs to be rebuilt. But that is after you verify spark and compression.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Has it ever sat for extended periods with fuel in it that didn’t have stabilizer added? Your carb may be varnished and need to be rebuilt.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

jdwright2482 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 57