Ana içeriğe geç

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1361 Soru Tümünü görüntüle

Will my touch ID still work if I replace the Logic Board

Hello all,

I couldn’t find a post with this kind of issue so I thought I’d ask.

I recently attempted a charging port repair and SOME HOW have damaged two pins of the camera connector on the logic board (Image below) and now the camera doesn’t work. I have no idea if this is fixable.

Block Image

So my question is. If I replace the logic board, will the touchid still work with it because I’ve seen a mix of responses and need a conformation before I go ahead and purchase a new logic board unless these two pins can be fixed.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

No your touch ID will not work with the home button you have. If you purchase another logic board Make sure it comes with its original home button. They are married to the logic board.

The damage you caused to the connector can be fixed by a repair shop for about $70

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

No, your TOUCH ID will not work as the home button and motherboard are paired together in the factory. Imagine the home button being the soul mate to the motherboard.

Of course, you can’t more than 1 soul-mate.

Update (07/07/2020)

No, your TOUCH ID will not work as the home button and motherboard are paired together in the factory. Imagine the home button being the soul mate to the motherboard.

Of course, you can’t have more than 1 soul-mate.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

Hmm I have the same problem! So can they be paired back together? Using a device? Thanks in advance

tarafından

Yorum Ekle

Yanıtını ekle

Daniel Fitton sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 7

Son 30 gün: 22

Her zaman: 2,042