Eşyalarını Tamir Et Topluluk Mağaza

Apple iPhone 5s, 10 Eylül 2013 tarihinde duyuruldu. Bu cihazın tamiri, daha önceki modellerinkiyle benzerdir; tornavida ve plastik açma araçları gerekir. GSM ya da CDMA olarak, 16, 32, 64 GB kapasiteli Gümüş, Altın ve Uzay Grisi renklerinde mevcuttur.

3530 Soru Tümünü görüntüle

Seçenekler

Burnt out coil on motherboard and the device isn’t powering up

Burnt out coil on motherboard and the device isn’t powering up

hi there guys just recently started researching about microsoldering. I have this iPhone 5s which after inspecting seems to have 2 burnt out coils just near the charging chip. I will uploads pics to show.

the iPhone isn’t powering up. Will getting the coils fixed repair the phone. Or does any one have any help as to where I should start. Thanks

Block Image

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

I would definitely start there. When you remove the coils it would be easier to check for shorts. You should be able buy a broken phone for donor parts. If you are going to do this yourself I would recommend practicing on some junk boards or have a professional do the work.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

6 Yorum:

This is a junk board I have lying around. Do you think the coils could be the reason for not powering on?

Also how would you remove the coils. Do you have a YouTube video or instructions this is going to me first attempt at something like this. Thanks

tarafından

Watch videos from jessa at iPad rehab, jason at sts telecom, and Louis rossmann on YouTube. You will need a hot air machine and a soldering iron. You can buy a cheap one on Amazon but the quality is soso. If you want to learn how to do this and are interested in maybe doing it for a living or side income I would recommend getting some decent equipment. Like a amscope 7x45 microscope with a camera mount. Hakko fx951 soldering station and fx2032 micro pencil and some hot tweezers. You can purchase all of the equipment on Amazon.

tarafından

Okay great I’ll take a look now

tarafından

According to schematics it is l2_rf and l3_rf

Which seem to be the burnt out ones anyone know where to purchase these 2 from?

tarafından

I am not sure. Are you in the us?

tarafından

1 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Rakesh sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 143