Ana içeriğe geç

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

2346 Soru Tümünü görüntüle

Digitizer connector stuck in socket on iPhone 4

So, i was replacing the LCD on my iPhone 4, everything was going well ‘til i tried to pry the digitizer flex cable out, as i pry it out, the connector got ripped from the flex cable and is now stuck in the socket, any suggestions? thanks so much!


Block Image

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

You’re gonna need someone with microsoldering experience to replace that LCD connector. If you don’t care about what’s on the phone then I wouldn’t worry about it.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Sancho sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 56