Ana içeriğe geç

Model A1502 / 2.6 GHz (Turbo Boost up to 3.1 GHz) or 2.8 GHz (Turbo Boost up to 3.3 GHz) dual-core Intel Core i7 processor with 4MB shared L3 cache.

494 Soru Tümünü görüntüle

Display not working, showing snow

A friend of mine dropped his laptop and the display isn’t working anymore. There is no visible damage.

Block Image

Block Image

Resetting NVRAM or SMC did nothing.

Connected to an external monitor works fine, so it’s either the display cable or the display itself.

I tried fiddling with the cable but nothing seems to happen. The friend said sometimes the display worked again when he moved it around. I tried all kinds of movements but it doesn’t happen to me. I keep getting the same snow screen.

I suspect I could replace the cable, and maybe fix the problem, or maybe it’s the display itself, what do you guys think?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Sadly, the display its self is damaged!

The way we can tell is the bars! The black & colored bars are do to a broken connection within the LCD panel and its connection to the T-CON at the bottom of the assembly. This is where the metal oxide contacts and either the ribbon cables breaking (TAB error) or the glass is cracked so the metal oxide lines are damaged on the LCD panel (which is the case here)

The noise you see is the lack of connection to the T-CON logic at the bottom of the panel (where the cable connects) is also damaged!

Time for a new display! The best you can get right now is this one 13” MacBook Pro Display Assembly - StainGate (L13/14) : Grade-B. You can clean off the anti defective coating if its bad.

Parts are hard to find right now due to COVID!

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

I replaced the screen with on from another (2013) MacBook. I put the broken screen on the 2013 MacBook. Same problem. Black bar and snow.

Funny enough, I had it stored away for over a month. Now I opened it again, and the snow is gone. There is only the black bar left. So it's actually somewhat usable again.

tarafından

Yorum Ekle
En Yararlı Yanıt

I would first buy a new cable since it’s less expensive than the display. If that doesn’t work, then replace the display and see if you can refund the cable.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Kaz van Wel sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 115