Ana içeriğe geç

Repair information and guides for the iPhone 6S Plus that was released on September 25, 2015. Model A1687, A1634

1041 Soru Tümünü görüntüle

Removing WiFi ic chip on motherboard

Hi guys quick question

ive been looking on YouTube about the WiFi chip on the 6s plus. Some show the chip needs to be programmed and some doesn’t show it. My issue is the WiFi isn’t working. The repair guy also mentioned about programming. Just wanted to know if that had to be done. Thanks

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

The Wi-Fi chip needs to be unbinded. I usually do this by removing the NAND which is where the information is stored and reprogramming it to unbind the Wi-Fi serial number. There are other programmers out there that claim to accomplish this without removing the NAND but I cannot comment on those as I have never used one.

Bu yanıt yardımcı oldu mu?

Puan 1

3 Yorum:

Yes because one of my repairers are telling me they can do it without programming and the other said they need to reprogram the chip. I don’t know which one I should for? Anyone else have any input to this.

tarafından

You don’t need to program the chip. You just need to un-bind the old ones serial number from the NAND and it will automatically write the new serial number when booted.

tarafından

Okay so if I was to get a new WiFi chip and solder it to the board. It will just. Automatically read the serial. Also how I’ll I go about unbind img th old serial number?

tarafından

Yorum Ekle

Yanıtını ekle

Rakesh sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 3

Her zaman: 586