Ana içeriğe geç

Error 4013 iPhone "dead"

My friend’s iPhone 6 doesn’t turn on. It charges and gets recognised by my pc. By trying to restore, im getting error 4013. The phone doesn’t respond to anything except the pc. I once saw the apple logo, but generally, no response to reseting, force restarting, booting or any button pressing at all. It doesn’t get particularly hot. Any suggestions are well apreciated. Thanks!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

This error is usually caused by a faulty NAND it cannot read or write from it. There is not much you can do besides sending it to a repair shop where they would remove and test the NAND. But that would cost more than the phone itself and would only be viable for data recovery.

Bu yanıt yardımcı oldu mu?

Puan 0


Would a reflow work or i need to reinstall the chip?


@yannisv The NAND is under filled so it is not a candidate for reflow. You really need someone with the equipment to remove and test it.


ok, thanks for your advice!


Yorum Ekle

Yanıtını ekle

Yannis sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 51