My Annke CCTV was working fine till I stupidly plugged a USB mini fan into it. The fan ran for about 10 minutes then stopped and now I have no power at all to the cctv.
I’ve taken board out and where the power goes in there is a large black square component. Can anyone tell me if its a fuse. The supply is 48volts. There is no continuity across this component.
Bu iyi bir soru mu?
İtibar: 16,3b
11
17
19
Hi @boness
TVS - This is a TBS - Transient-voltage-suppression diode
I see it is powered by an external power adaper.
Do you have a multimeter?
Measure and check on if the power adapter is giving the out correct voltages.
Bu yanıt yardımcı oldu mu?
Hi, thanks for your reply. I have checked the psu and it is working
take more pics , showing up the whole mainboard.
try removing the mainboard and check if there are any burnt components
Son 24 Saat: 0
Son 7 gün: 1
Son 30 gün: 5
Her zaman: 157
