Ana içeriğe geç

1.7 GHz dual-core Intel Processor (Turbo Boost up to 2.6 GHz) with 3 MB shared L3 cache

154 Soru Tümünü görüntüle

Getting error trying to format drive

Hi, what about MacBook Air 11" 2012 where there is no SATA cable?

While doing the partition, it shows error like this;

Partition failed

Partition failed with the error:

Unable to write to the last block of the device.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

The drive is a custom blade drive in, I have replaced several of them using drives purchased from OWC with success.

Sometimes the board needs to be resoldered using a reflow system if replacing the drive doesn’t work which is very expensive.

I have occasionally done a ‘botch’ job by removing the board and putting it in a 150c temperature oven on a silicone mat for an hour or so but I don’t recommend it as it is very easy to destroy the board by overheating or warping if it is cooled too quickly

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

cackling sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 16