Swapped lower enclosure now mac wont boot, fans twitch, help!

Question

MacBook Pro 15" Core Duo Model A1150

1.83, 2, or 2.16 GHz Core Duo processor

281 Soru Tümünü görüntüle

ednedesigns @ednedesigns

İtibar: 35

3

1

Gönderildi: 24 Oca 2010

Seçenekler

Swapped lower enclosure now mac wont boot, fans twitch, help!

Hi,

I dis assembled and swapped the lower aluminum enclosure on my a1150 MacBook Pro. I followed the instructions meticulously and now upon reassembly the computer will not turn on.

the battery takes a charge and displays full, i have tried with and without power adapter.

When I press the power button, the two fans attempt to spin and appear to twitch. Then nothing, I have tried removing the hard drive with the same results.

Please help!

Thanks,

ANDY

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 2

Yorum Ekle

2 Cevap

Seçilen Çözüm

mayer @mayer

İtibar: 685,2b

MacHale Enterprises

3,4b

1,1b

2,6b

Gönderildi: 24 Oca 2010

Seçenekler

Reset the RAM and make sure it is all the way in. Try it first with just one module.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

8 Yorum:

thanks, tried this. No change. i still get the two fans trying to spin and no other signs of life from the mac. I carefully dis assembly the computer again and re assembled it to double check all connections with no change in results. i don't know what else to try...

ednedesigns tarafından 24 Oca 2010

Tell me about why you replaced the lower enclosure. Was it working before you started?

mayer tarafından 24 Oca 2010

computer worked fine before lower enclosure swap, except for a dead superdrive. my intent was to replace the superdrive and while i was at it swap the enclosure as it was dented in the superdrive corner - likely the cause for superdrive failure.

Thanks for your responses so far, I am not sure how to proceed. I would love to be able to tell if the motherboard is dead.

Thanks,

ANDY

ednedesigns tarafından 24 Oca 2010

Tell me about the replacement drive. Are the part numbers the same? Where did you get the part?

mayer tarafından 24 Oca 2010

The replacement superdrive part number matched exactly. I bought it off ebay - seller guaranteed it would work. i did attempt to turn on the computer with the hard drive and the optical drive disconnected and removed from the MacBook Pro. I got the same results - when i press the power button the only result is that both fans try to spin as long as i have my finger on the power button, but do not fully rotate - they kind of stutter.

ednedesigns tarafından 24 Oca 2010

3 tane daha yorum göster

Yorum Ekle

thanks, tried this. No change. i still get the two fans trying to spin and no other signs of life from the mac. I carefully dis assembly the computer again and re assembled it to double check all connections with no change in results. i don't know what else to try... — ednedesigns
Tell me about why you replaced the lower enclosure. Was it working before you started? — mayer
computer worked fine before lower enclosure swap, except for a dead superdrive. my intent was to replace the superdrive and while i was at it swap the enclosure as it was dented in the superdrive corner - likely the cause for superdrive failure.

Thanks for your responses so far, I am not sure how to proceed. I would love to be able to tell if the motherboard is dead.

Thanks,

ANDY — ednedesigns
Tell me about the replacement drive. Are the part numbers the same? Where did you get the part? — mayer
The replacement superdrive part number matched exactly. I bought it off ebay - seller guaranteed it would work. i did attempt to turn on the computer with the hard drive and the optical drive disconnected and removed from the MacBook Pro. I got the same results - when i press the power button the only result is that both fans try to spin as long as i have my finger on the power button, but do not fully rotate - they kind of stutter. — ednedesigns