Eşyalarını Tamir Et Topluluk Mağaza

The wi-fi only version of Apple's iPad Air, model number A1474. Available in Space Gray or Silver, it packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

299 Soru Tümünü görüntüle

Seçenekler

ipad air a1474 sleep lock button don't work,but turn on

hi dears

after change digitizer for ipad air 1rst model,all was fine when i test digitizer before installation.all work perfect.but after installation power button turn ipad on and off.but won’t sleep or wake ipadalso when ipad turn on its go to sleep directy after start.

i triedt lo lock ipad from home button accessibility,and its not work also from there.

hardware fix looking for if some expert here can help :)

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Hello, you have a faulty sleep/wake sensor. This is a solder component on the digitizer itself. It can be replaced, but it is much easier to just replace the digitizer again with a high quality part. I have had this issue with cheaper vendors before.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

hi dear

thanks for your answer, i wait to change the home button connector first and check again with new digitizer to see if its help.

will replay here when i get it done.

thanks so much

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Lasse ANB sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 10

Her zaman: 60