Ana içeriğe geç

0003 after attempting to reflow

So i have a old 360 from 2008 and it has the red ring and its code was 0102 which is the bad gpu joints and after following this guide on YouTube https://youtu.be/bqSKDluZMmY the rrod has changed to 0003 and its fan only spins for a second

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

The invader 2  0003 is either a dead GPU or no power going to the GPU. It all will depend how you did the “reflow”. Remember, that this is always a hit or miss. Ultimately you’d need a reball and a new IC since it is the actual chip design that causes the failure

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

Oh i remember reading on a site about the and it mentioned something about the psu no longer working

tarafından

Yorum Ekle

Yanıtını ekle

The invader 2 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 9

Son 30 gün: 18

Her zaman: 341