I started the screen replacement project. Removing the old screen all done. Now I am trying to re-install back the parts and having a lot of difficulty working with the tiny screws. Can’t seem to hold the screws in place so that I can screw them back in.
Any tips to work with those tiny screws.
ie; do i need some special tool,
Please help!
Bu iyi bir soru mu?
İtibar: 685,3b
3,4b
1,1b
2,6b
Most guides list the tools needed at the top of the guide. You will need a magnet P2 driver for your project:
Bu yanıt yardımcı oldu mu?
İtibar: 11,4b
7
5
1
Thankfully the screws in a lot of electronics are magnetic so a magnetic tipped screwdriver will really come in handy. Just make sure you’re putting the screws back in the proper spot. If you put the wrong screw in the wrong place you can damage the board.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 3
Son 7 gün: 5
Son 30 gün: 9
Her zaman: 187
