Replaced hard drive. Fans super loud and no display

After several months of super slow performance and pinwheeling with my iMac I started to suspect that the mechanical hard drive was slowly failing so I attempted a swap with a SSD. I purchased an adhesive and cutting wheel kit and the display came off no problem. I then swapped out the drives with no issues either. At that point I reassembled with painters tape and powered the machine on. The display remained blank and the fans are spinning at full speed. LEDs 1, 2, and 3 are light and the 4th is off. I also tried an external monitor connected via a mini displayport to displayport cable but I’m not getting video there either.

At this point I’m not sure where to go next. Can anyone help?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle