Ana içeriğe geç

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

600 Soru Tümünü görüntüle

White screen on start

Ive installed a new harddrive and optical drive I bought from ifixit. Install was easy due to the detailed guides.

Now my problem:

Ive inserted my osx disc, restarted and held down option. The screen appears white or a slight grey. The mouse cursor appears. But boot options do not.

If I reboot and do not hold any keys down, I get a blinking folder with a question mark.

What should I do here?


Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Usually when repairing or upgrading a computer it's a good idea to just do one thing at a time and make sure it works before proceeding to the next because if there is a problem, you don't know where to look. I don't know why you are replacing the drives or what drives you got. Usually you would replace the hard drive first, format the drive and install a system. Then go for the optical drive.

Bu yanıt yardımcı oldu mu?

Puan 5


Optical drive was dead, then the hardrive went a few months later. So to add a new hard drive that comes unformatted Id need a working optical no? :)


hey @mayer any ideas or tips?


I'd go with an external DVD drive from LaCie like this one:


very good idea


Ok, So I got my hands on an external optical drive. I inserted the recovery disk, held down option key and rebooted.

While holding down the option key I get the white screen again and mouse cursor appears and thats it.

On a side note, the 4 lights that appear on the board are all lit up.

What next steps should I take?


2 daha fazla yorum göster

Yorum Ekle

Yanıtını ekle

igeekout sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 711