Ana içeriğe geç

Wi-Fi only version of Apple's 2nd generation iPad Air. Model A1566.

212 Soru Tümünü görüntüle

Can you identify this left over part?

Block Image

Quite a time gap between taking part my iPadAir2, getting a screen, putting it back together, ended up with this in my little parts jar at the end. I have also been fixing a few phones though so I am not certain that this is from my iPad, any ideas?

Cheers

Mark in Perth

Western Australia

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:

That is the part that goes on the earphone, it contains the small grid. On most replacement screen it is already presinstalled so it probably fell of the screen you put in the trash. Still you could check if the screen you recently replaced has a protective grid on the earphone.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

That looks like an earpiece speaker bracket from an iPhone 7/8/SE2 to me (same part on all). Often times a new screen will come with this piece pre-installed as @refurbish stated, but on at least the ones we use, the adhesive holding it in during shipping isn’t really all that strong and it can wander out of place. The screw that goes through that metal ring is typically what really holds it in place. If you still have those phones available, I would check and see if one of them is missing that bracket. If you don’t it shouldn’t be too big of a deal, I have tested phones without those before and it doesn’t really seem to harm anything major. Main thing it seems to do is help with noise isolation and prevention of dust entry.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Mark Brown sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 33