Ana içeriğe geç

A television game console produced by Sony Computer Entertainment; the PlayStation 4 Slim (CUH-2000 Series) is a thinner replacement model for the original PS4. Announced September 7, 2016.

564 Soru Tümünü görüntüle

Why I am getting every time that error: SU-41350-3

Hello, previously it had the other error code (SU-42118-6) when I bought it from seller, when I get the item and plugged in it throwing that message: Can not find the update file (SU-41350-3). I tried different usb drives 8 and 16gb size. downloaded reinstallation file and tried to reinstall, but after pressing ok (x button) it shows that error. is there any good solution? HDD has 100% health

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
3 Yorum

I replaced HDD , both hdd has 100% of health. but still getting the same error

tarafından

I Think Tronicsfix should be good at this point. He would have experience

tarafından

Create a usb with exfat or fat32 partition. Create a folder structure PS4\UPDATE and place your PSUPDATE.pup inside it. Then Ps4 will recognize it.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi!

How is the USB formatted? Should be FAT32.

Also make sure you use the “Reinstallation file” and not the “update file”.

You should need this one: http://dus01.ps4.update.playstation.net/...

Guide: https://www.playstation.com/en-us/suppor...

Note: If nothing is working, just swap it with a known working hard drive. If that also fails, my guess is that something went wrong in the firmware…

Bu yanıt yardımcı oldu mu?

Puan 2

5 Yorum:

I did the same way several times, reinstallation file written on the fat 32 formatted usb drive. correct folder name. I replaced hdd with another one, but same problem . maybe the previous error code is in action?

tarafından

If that is the case, please read the following article: https://windowsreport.com/ps4-errors-su-....

They are telling "This error comes from a broken ribbon connector between your motherboard and BD-ROM". Perhaps replacing the ribbon cable can work, or the drive needs to be replaced. Worst case: Something is wrong with the drive's PCB or motherboard related.

tarafından

I have working one and will try . thanks

tarafından

No good news. I replaced the BR drive. also checked all ribbon cables connection between two side, they all beeped with multitester

tarafından

Perhaps it is firmware or motherboard related.. Motherboard looks good too?

tarafından

Yorum Ekle

Yanıtını ekle

Giorgi Mamardashvili sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 15

Son 30 gün: 44

Her zaman: 1,674