Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1146 Soru Tümünü görüntüle

Touchscreen stops working and forced to connect the flex everytime

Hello,

Like the tittle says, today i turned on my phone and the touchscreen stopped working completely, so i opened the phone, unplugged and plugged the screen flex cables, after that the touchscreen came back to life but suddenly some ghost touches started to happen and again the touchscreen became dead again and im forced to repeat the process all over again with the same results.

Any clues?

Thanks in advance.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Since the touch components are on the screen and not the logic board the most likely cause is either the connector or the screen. Check the connector under some magnification making sure the pins are not pushed into the plastic. If it looks alright it will be a faulty screen.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Daniel sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 8