Ana içeriğe geç

Mid 2012 model, A1278 / 2.5 GHz i5 or 2.9 GHz i7 processor.

1624 Soru Tümünü görüntüle

Battery or hard drive? Which do I swap first?

I am thinking of doing two separate swaps - replacing the battery first and fixing issues with the time via terminal (so my new hard drive will be recognized). Then go back and swap the hard drive. Does this sound like a good idea?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
6 Yorum

Hello Jean,

Yes that sounds like a good idea! Hard drive replacements were so easy back then. I got an M1 MacBook Pro and I tried upgrading the storage but I failed. The battery may be aging so that would also be a good idea. Here is a tip: Get an SSD which is much faster and will improve performance of your computer.

Happy Fixing

-Javen

@tacofixes

tarafından

I would rather keep the original battery, especially if it holds a good charge. A lot of the clone packs fail sooner then the original Apple batteries.

tarafından

True Nick maybe it could be an old battery

tarafından

One from ifixit would not fail.

tarafından

@tacofixes The one in my 2012 13" is on limited time at this point, but I'd rather hold onto it until I can find an actual Apple battery.

I don't trust most 3rd party batteries at this point. There's more that have quality issues then ones that are similar in quality and performance.

tarafından

1 tane daha yorum göster

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

First off, don’t clone MacOS - it hasn’t worked reliably since Lion introduced recovery partitions on some of the newer Macs! You want to backup the Mac and restore it from a backup after clean installing the OS.

Second, make sure you swap the HD cable - the original cables are often SATA II and they will not work right with SSDs due to that. Not all of them are bad, but enough are you are better off doing the swap to be safe. It’s one of those issues I fix in these right away as soon as I have it open, so I know it’s been addressed due to how bad a sudden failure can be. Before you install the new cable, the trick is to put electrical tape where the old cable lived before installing it.

In terms of where to cover, refer to this photo of my old 2011 13” - I did the same in my 2012 13” when I swapped cables.

Block Image

Bu yanıt yardımcı oldu mu?

Puan 5
Yorum Ekle

Yanıtını ekle

Jean Marie Smith sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 2

Son 30 gün: 2

Her zaman: 132