Eşyalarını Tamir Et Topluluk Mağaza

Wi-Fi only variant of the fifth generation of iPad, released in March 2017. Available with 32 and 128 GB storage options featuring a 9.7" Retina display and 64-bit A9 processor.

101 Soru Tümünü görüntüle

Seçenekler

iPad Home Button not working after Digitizer Replacement

I replaced the digitizer specifically because I accidentally broke the home button connector ribbon. I have to use the one I have (the new one I mean) or buy another. When I connect the digitizer and LCD panel, the home button does not work. I have not fully assembled the iPad yet, as I wanted to check if it worked. Do I have to fully assemble to get the button to work? and if not then can anyone see my problem?

Block Image

Block Image

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

That looks like an iPad Air home button, which carries a different protocol and is not compatible with iPad 5.

Either that or the home button is faulty.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

That’s actually a really helpful input, when I bought it it was labeled as a digitizer for iPad 5 or iPad Air. So does this mean that it just really isn’t the right home button?

tarafından

@Nathan Mayo That explains it, you got the wrong home button (iPad Air)

tarafından

Yorum Ekle

Yanıtını ekle

Nathan Mayo sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 37