Ana içeriğe geç

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Soru Tümünü görüntüle

Speaker not working even after replacing it

Hi,

I have an iPhone 6 that was water damaged a few years ago. It’s still functioning well except that the hadphone jack and loud speaker doesn’t work. I don’t really care about the headphone jack but ordered a replacement speaker online. First after replacing it I was able to get the speaker to work for a few seconds but after a while it stopped. I opened it up again to check the connections but can’t see any corrosion. Is there anything else I could try replacing?

//Johan

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

A water damaged iPhone 6 will eventually fail as the corrosion takes hold. In the meantime I would replace the charging dock connector. They are only a couple of dollars and will probably bring your sound back. While you have the phone open I would lightly scrub the logic board with 99% Isopropyl alcohol.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

Thanks, I replaced the lightning connector as well. Afterwards the phone booted normally but complained of low battery and died before I had time to connect a charger. The screen lights up when I connect a charger but it doesn't seem to charge, after two hours in the charger it still won't boot. Screen still on and shows low battery. Any ideas what could be wrong?

tarafından

Yorum Ekle

Its broken. take the storage out and put it in a new phone. you cant fix it.

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

@guyguyguyguy not a good answer and all. There is no storage that can be removed etc.

tarafından

Yorum Ekle

Yanıtını ekle

Johan Newman sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 34