Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3252 Soru Tümünü görüntüle

My screen stopped working after disassembly?

Hello,

I ordered a new home button for my iPhone and decided to change it myself. I did everything really carefully, according to this manual: iPhone 4S Teardown .But after reassembly, I end up with the screen not working, only the backlight. I tried reseting the phone, suggested by some people on the forums, but it didn't work. The phone sync fine and it could take calls, so I guess the logic board is fine.

Does anyone have any idea, what might be the problem?

Thanks

Update

It seems that the ribbon cable of the Digitizer is tore. They are extremely delicate, so even a slight bending will break them.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 2

Yorumlar:

Well if you don't feel comfortable about doing it yourself, we have really solid techs.

Edited: Please post your personal or business information in your profile.

tarafından

Yes, so do most of my colleagues on here as well, but we do not advertise it.

tarafından

I note that Hayden is a real contributor, he's actually answered one question. Where he spammed

tarafından

Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

For the future, I would recommend using the guides and not the teardowns. The teardowns do not feature much in the way of disassembley instructions, where as the installation guides do! When you go to do your display check out this guide.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Kamen Dimitrov sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,782