Ana içeriğe geç

A2116 / 2019 / 3.6 GHz quad-core i3, 3.0 GHz 6-core i5, or 3.2 GHz 6-core i7 processor. Released March 19, 2019.

51 Soru Tümünü görüntüle

Machine is powering on but no display

During OS(Big Sur) updation suddenly light goes off. After few minutes we have tried to powering on the machine then we have found machine is powering on but no display. We have replaced the RAM and Hard drive but problem not resolve.if any one have any solution

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Ouch! I suspect you where a bit too quick!

During the OS and update processes your system will often appear off, in truth its just not able to display anything as the systems firmware (EFI) is being updated. So what you’ve now done is corrupted the process and pulled the chair from under the system to boot replacing things!

OK, so the firmware is in never-never land which we need to fix. At this point I would carefully put everything back together making sure the system does not look shop worn so Apple won’t object.

Now its time to visit an Apple Store or authorized service center with your system as being the best course.

So is there anything I can do my self? You’ll need to replace the logic board Apple has altered how EFI is setup on the newer systems and using a custom chip.

I have not been able to get the needed chip as well as the firmware. As such you can’t replace the chip with the needed firmware on these newer iMac’s. Apple has made it much harder to fix a simple issue like this. While still not an easy fix as you need to desolder a chip off the logic board and replace it at least it could be done.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Moinul Haque sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 12