Ana içeriğe geç

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1158 Soru Tümünü görüntüle

The phone doesn't change status as soon is connected to a charger

This iPhone dropped in water.

It still works but did not get the charge (but it can connect to other device)

I changed the battery (I thought it was short circuited)

After the change the problem was not solved and it even cannot connect to other devices

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

The dock assembly is likely bad and needs to be cleaned or replaced. You may also have corrosion that needs to be cleaned with isopropyl (>90%).

These are the two likely solutions, however, if corrosion is real bad the resistors by the dock connection could have been fried (less likely).

Hope this helps.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

fratini sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 221