Ana içeriğe geç

Repair guides and disassembly information for Apple's 7th generation iPad. Released September 25, 2019. Model numbers: A2197, A2200, and A2198.

118 Soru Tümünü görüntüle

LCD flex cable connector damaged

Hello,

I was recently replacing the screen on a 7th generation iPad model A2197. However, the flex cable connecting the LCD to the board broke at the LCD end.

I purchased a new cable, however, the LCD connector was basically melted onto the copper and I had to remove it with a small wire brush which may have damaged the connector beyond repair as it's not functioning, no action on the LCD at all.

Thats what brings me here. Is it possible to solder or repair this? https://imgur.com/gallery/XZkCwzI

Thanks in advance for your response, it's much appreciated.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

hello Danth Ex

unfortunately, the tape was damaged too close to the screen. It is no longer possible to combine it. You need to buy a new screen. There's a guy in LA who takes down the dies and replaces entire assemblies of flex tapes. Try to find him in the net. I don't remember his name anymore - he made several screens with broken tapes for me.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Danth Ex sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 9

Her zaman: 514