Ana içeriğe geç

Released September 21, 2018. Models A1920, A2097, A2098, A2100. Available as GSM or CDMA / eSIM or nano-SIM / 64, 256, or 512 GB / Silver, Gold, or Space Gray. (Pronounced "iPhone 10 S.")

254 Soru Tümünü görüntüle

iPhone XS bootlooping after hardware changes. Panic log pic attached.

Block Image

Block Image

Panic log pic is attached here. What does this mean? Where is the issue coming from

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

3 Cevap

Filtre ölçütü:
En Yararlı Yanıt

The picture looks like it’s on warp speed.

What hardware was replaced? Can you be more specific?

It says thermalmonitord failed to update its report.

Bu yanıt yardımcı oldu mu?

Puan 2

Yorumlar:

The following was replaced:

Battery

Charging port

Wifi flex

Interconnect flex

Charging flex

Display.

Added betterr pic to post.

I took the first one in a pinch as the phone is bootlooping.

tarafından

@Roro Missing sensor prs0, maybe a bad charging flex.

tarafından

Yorum Ekle

Looks like the prs0 sensor is missing stated in the log, means possibly a bad charging dock flex, Replace it with a 100% OG pulled from an iCloud locked phone. Should fix the issue. Cheers!

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Looks power switch flex faulty remove and check. If the problem was the same then try with another middle frame.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

Which part of the log says that?

tarafından

Yorum Ekle

Yanıtını ekle

Roro sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 11

Her zaman: 76