Ana içeriğe geç

The Lincoln model K2513-1 is an electric flux-cored welder designed for basic wire welding projects and repairs. It can output between 30 Amps and 125 Amps at a rate of 50 - 500 inches of wire per minute.

1 Soru Tümünü görüntüle

I want to buy Lincoln 180 welding machine

I am thinking to buy a mig welder from the Lincoln brand. It could be this Lincoln 180 MIG welder. What is the difference between these two model? I am thinking to buy this model: https://bestmigwelders.org/lincoln/180-m... . What do you think about this Lincoln model.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Hi @rswebss

Here are the product sheets for both models.

A quick read through indicates that the K2513-1 is a smaller capacity unit than a MIG 180C (model #K2668)

By this I mean that the output current is only 30A -125A as opposed to 20A-180A and the cored wire size is also smaller i.e. 0.6-0.9mm as opposed to 0.9 - 1.1mm. There are other differences as well but I haven’t read it all to find out.

It may depend on what you want to do with it.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Mr Roswobs sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 6

Her zaman: 59