Eşyalarını Tamir Et Topluluk Mağaza

Model A1312 / Mid 2010 / 3.2 GHz Core i3 or 2.8 & 3.6 GHz Core i5 or 2.93 GHz Core i7, ID iMac11,3

382 Soru Tümünü görüntüle

Seçenekler

27'' iMac 2010 Backlight Failure

The backlight on my 27’’ iMac 2010 is slowly dying. Getting a little more dim every week, and I can see dark spots between the backlight “bulbs(?). I don’t have the tools or the skills to do the soldiering like some people recommend. Should I try to replace the display or does the inverter board solve this issue? How can I tell if it’s the inverter board or the literal backlight strip?
Also does a 2011 display work in a 2010 machine?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Most likely the LED bar connection or a few LED have died and often the backside also gets darkened

Block Image

Block Image

Here’s one source iMac 27" A1312 - Mid 2010, Apple P/N 661-5568 and the guide iMac Intel 27" EMC 2390 Display Replacement

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

Thanks so much, Dan. Wish the news was better, but I appreciate your expertise. Would a 2011 display work in a 2010? I ask because I found a cheap one in my area.

tarafından

@daevrojn - There are some differences. It will take some work to convert it.

tarafından

Yorum Ekle

Yanıtını ekle

Alex Nevin sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 17

Her zaman: 531