Eşyalarını Tamir Et Topluluk Mağaza

2.0GHz, 2.3GHz, or 2.6GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.8GHz) with 6MB shared L3 cache.

580 Soru Tümünü görüntüle

Seçenekler

Late 2013 MacBook Pro 15 battery won't charge after repair

Hello! I recently replaced the battery on my 15” Retina Macbook Pro (late 2013) and now it will only turn on when plugged into the charger. If I unplug it, it immediately shuts down. Battery is at 0% according to both the device and Coconut Battery.

I had some trouble disconnecting the battery during the replacement and worry that I damaged a logic board component (see circled area in image - not my device). Is there anything else that could be the culprit? I was trying to avoid taking it to Apple since it’s so far out of warranty but should I take it in?

Block Image

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0

1 Yorum:

Claire Norris post an image of YOUR logic board showing the circled area. Let's see if it does show some damage.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

What I can tell you is the battery micro-controller has failed which is why the information within CoconutBattery is labeled NaN as well as missing. At this point you’ll need to replace the battery.

Where did you buy the battery?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

2 Yorum:

I bought the new battery from iFixit in order to replace my original mac battery.

tarafından

@Claire Norris Time to talk to them on getting a replacement unit iFixit Customer Support

tarafından

Yorum Ekle

Yanıtını ekle

Claire Norris sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 83