Ana içeriğe geç

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Soru Tümünü görüntüle

4s Back Panel Is Stuck On

I have removed both screws, but the back panel will not slide up. I’ve tried increasing pressure, cleaning the sides with alcohol and increasing grip with some gaffer tape. I can’t replace the battery if I can’t open it. What am I doing wrong?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

The battery is probably expanding and putting pressure on the back glass making it harder to slide up. I would try putting the phone face down on a non slip surface like a rubber mat or something then slide the back up while putting slight downward pressure on the phone.

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

Hi Jay, I'm jumping in on @xnriqux's answer. If you think the battery could be swollen, make sure to be really cautious working on you device. A swollen battery is quite dangerous–it can be a serious fire hazard. Check out our wiki on swollen batteries before you attempt your repair so you can be extra cautious! What to do with a swollen battery

tarafından

@amber Thank you!

tarafından

Yorum Ekle

Yanıtını ekle

Jay Hackens sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 28