Ana içeriğe geç

GSM iPad 2 with 16, 32, or 64 GB of storage, and a Dual Core A5 Processor. Model Number A1396. Repair is complicated and requires heat and prying.

152 Soru Tümünü görüntüle

After replacing screen iPad 2 3G reboots when you move it

Hi,

I have repaired like 5 or 6 broken glasses of iPad 2 WiFi before this iPad 2 3G (GSM). I never had a problem before it.

Everything went fine until I was preparing to reassembly the device. I turn it on before fixing the new glass to the frame and I realized that it turns off every time I make a small move in the device.

So now it is completely useless because you cant hold it without get another reboot.

I have tried switching the logic board. I put in this iPad 2 3G the logic board of an iPad 2 WiFi and the worked fine. But then when I put back the gsm logic board the same problem shown again.

Anyone have any experience with this kind of problem?

I am going to make more test, but I think it would be great if we share more info about iPad 2 troubles.

Thanks and keep repairing!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

4 Cevap

Filtre ölçütü:
En Yararlı Yanıt

i had the same problem, the slighted touch anywhere on the ipad made it turn off! after some searching i found what was causing this. apparently the motherboard screws had to be tightened.

as soon as i pressed down on the board it turned off.

took it back out, refitted and tighter the screws, voila!

works like a charm

hope this helps

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

UPDATE:

I have found that the problem is because of the antennas located on both sides of the facetime camera. When you press them the iPad just turn off!

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

So what did you do to fix the antenna problem?

tarafından

Yorum Ekle

well i need help with my screen im trying to find the cheapest place to get a new ipad screen but i dont know where i can get a cheap one from because everywhere i go it cost like £75 or £90 so i dont know what to do with it because everytime i go on it i tap an app and the app wont come on like the keybord that just useless

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

its useless

for me to go on my ipad when the screen wont work

tarafından

cheaper sometimes to get a new one because it by th time ave finished with it it will be full price anyway

tarafından

Yorum Ekle

I too had the problem of my ipad 2 resetting/rebooting when I moved it. When I pulled the screen again I found that I hadn't fully seated the motherboard screws. Tighten and fixed.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Zrush1 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 3,138