Ana içeriğe geç

Model No. A1367 / 8, 16, 32, or 64 GB capacity

914 Soru Tümünü görüntüle

Blotchy area on new screen

My son dropped his iPod and broke the glass. I purchased a new screen with digitalizer attached, installed and closed it up. I then discovered the wifi antenna was broken. When opening again the layers of paper and such came separated from the glass. The new wifi antenna worked, and the screen still works. But now I have a greenish gray blotch right under the word iPod. The blotch seems to grow. I'm wondering if it is possible to fix this, or if I need purchase yet another screen and try again...

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

docbill, probably not. It sounds like it has, or is, separating. Try to contact the vendor and see if you can get a replacement for it.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

PROBABLY THE PROBLEM IS WITH THE LCD QUALITY YOU HAVE BOUGHT BUT CHECK FIRST THAT THE SURFACE OF THE LCD FRAME IS CLEAN WELL AND YOU ARE USING THE RIGHT STICKER

(not so thick) during assembly coz, it will cause blotch when lcd surface is press. hope this will help.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

docbill sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 985