Eşyalarını Tamir Et Topluluk Mağaza

Repair and disassembly guides and support for dish washing appliances.

704 Soru Tümünü görüntüle

Seçenekler

replaced main control - same F2 E2 error

2021 Whirlpool dishwasher - 15 months old - just past warranty :(

parts look just the same as shown here...power surged and then the e2 f2 code started flashing

I checked connecting wire continuity - OK

replaced user interface (with buttons) board - same F2 E2 error

replaced main control - same F2 E2 error

repairman proposed same solution...

time for new dishwasher!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0

1 Yorum:

@indycarl your DW is a Whirlpool WDT720PADM2? Just to verify, You did replace the main control module?

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

@indycarl this is tough since we do not know what your repair person checked etc. Usually all you have to do is to:

  • Removed the front panel.
  • Checked 4 pin connector on the P1C connector on both the UI board (thin PCB that interfaces with the buttons) and the main control board (larger control board where all the colored wires interface)
  • On the same connector measure the voltage between pin 2 and 4. It should show ~5V.
  • .If there is no voltage replace the main module
  • If there is 5V replace the console.

Your DW should be using the W10610059 tech sheet. Just in case you do not have it, get it here W10610059 Tech Sheet W10610059 Rev B

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

IndyCarl sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 17

Her zaman: 843