Ana içeriğe geç

Guides and repair information for Electrolux vacuums.

9 Soru Tümünü görüntüle

Electrolux Ergorapido EER89IBM brush roller doesn't spin

Hi all,

I have an electrolux Ergorapido EER89IBM, and the brush roller doesn't spin. There was a period where it spins for about a minute before stopping, and it will spin again if I switch the vacuum off then on again. Now it won't spin at all. The vacuum itself works fine, but since the roller doesn't spin it doesn't collect dust properly.

I'm thinking of replacing the motor in the nozzle since it might be damaged, but I have no idea how to disassemble the nozzle head. Does anyone have any guide on how to replace the motor?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

@aprabaswara check this great video at around 23min. I suggest you look at all of it since it pretty much goes through a total teardown.

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Thanks for the video! Unfortunately it looks like Electrolux changed the nozzle head's design, so the assembly in my unit is quite different from the one in the video.

tarafından

Yorum Ekle

Yanıtını ekle

aprabaswara sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 14