Eşyalarını Tamir Et Topluluk Mağaza

Model A1136 / 30, 60, or 80 GB hard drive / black or white plastic front

797 Soru Tümünü görüntüle

Seçenekler

Cannot restore after hdd replacement - not detected by computer

I bought a used ipod off ebay so I could replace the battery and hdd

having done the replacements I can't get the ipod to work again

The ipod powers on and either displays a sad ipod icon or tells me to connect to a pc to restore on itunes

When I connect it up to restore on itunes it powers on and displayed the do not disconnect screen for a while before rebooting to show the sad ipod icon

The device is also not being detected by itunes or showing up on any computer I connect it to.

I'm starting to think that this is a logicbord or hd cable issue. Is there a way to tell which it might be or is there a step I have missed

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Hi

I had this issue with a 7th gen and I fixed it by doing the following

Putting into disk mode

Here’s a link!

https://www.wikihow.com/Put-an-iPod-Into...

And reformatting the drive in disk utility then try and restore it

Hopefully this helps

Thanks:-)

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

no I have tried that, I managed to get the thing into diagnostic mode, all the diagnostic information from the sd cards is garbled. Ive tried putting it in 2 different logic boards with 2 different hdd cables

tarafından

@Jack Curnow

How much storage are you trying to put in?

tarafından

Yorum Ekle

Yanıtını ekle

Jack Curnow sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 34