Eşyalarını Tamir Et Topluluk Mağaza

PlayStation 3 Slim, orijinal model numarası CECH-2000 olan PS3 video oyun konsolunun ikinci sürümüdür. Sony Computer Entertainment tarafından üretilmiştir ve orijinal (Fat) Playstation 3'ün birçok sorununu gidermiştir. Ürün 1 Eylül 2009 tarihinde piyasaya sürülmüştür.

465 Soru Tümünü görüntüle

Seçenekler

Fan not speeding up

Just removed IHS plates from both Cell and RSX, applied fresh grease. Before that fan used to max up after few minutes of any game, now it always idling. After 3 hours of MGS 4 it suddenly briefly maxed twice for 1-2 seconds both times with about 1-2 seconds pause, returned to idle speed and overheat warning appeared. Console turned off in few seconds after the warning. Doesn't seem to be false overheating, motherboard shield was pretty hot on touch.

I'm on latest official firmware (4.89). Fan test (when powering on while holding eject button) works, fan blows like crazy. Overheating message tells me that temp sensor also works. What could be the issue?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Solved it by installing evilnat 4.89 CFW and offloading temp management from SYSCON to CFW module. Looks like some issue with SYSCON like poor leg connection. Maybe I damaged it while removing IHS plate using heat gun or some other way. That may explain sudden fan bursts on high temp, it might be just high temperature temporarily restored that connection. Anyway, problem solved. Thanks for trying to help, bill!

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle
En Yararlı Yanıt

Seçenekler

A common mistake about thermal paste is using a lot. However, I don't know how this would cause your fan issue.

The fan works, the temp sensing works. The heat sink seems to work if it took 3 hours of play to heat it up.

The only variable is the replaced paste. Maybe redoing that insuring that it is a thin even layer on the device might work. Spread it with a razor blade evenly over entire surface

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

Dmitry sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 17

Her zaman: 442